Structural features of sheet metal machine room
1.The structure is simple and convenient for cutting; Of course, it is simplified on the basis of…
Welding type when connecting sheet metal parts
For single-sided V-shaped groove, single fracture flame can be used to cut the groove; On the contrary,…
Sheet metal surface drawing
Objective this standard specifies the surface zoning, surface quality requirements after polishing, degradation acceptance requirements and inspection…
Welding process
The defects must be completely removed before welding, and the groove surface shall be flat and smooth…
Sheet metal bracket design
The feature part model established by using this thinking has the following characteristics： (1) the integrated feature…
Hardware cabinet
Surface treatment of hardware: generally, there are painting and electroplating, which are used to prevent rust and…
How to design different sheet metal supports?
The L-bracket is usually designed for a 90 ° angle, but the manufacturer can create different angles…
Metal plate chassis with screws
For sheet metal processing manufacturers, a complete product is assembled by countless parts, just like the screws…
Introduction to automatic stamping production line
The full-automatic stamping production line is a large-scale automatic stamping production line that integrates various technologies. There…
Benefits of laser cutting in the production of sheet metal chassis
1.Ultra low cost, the power consumption of laser per hour is only 0.5~1.5 degrees; It can blow…